these flters are manufactured on quartz, which provides optimal temperature performance and are available from 80 -1600 mhz. this tcrf is designed for narrowband if fltering such as in satellite transponders, directional fnders and anti-jam modems. other packaging styles are available for more rugged environments and applications. standard part numbers as well as custom solutions are available. please contact sales for more information. saw filter 433.92 mhz saw bandpass filter, 0.18 mhz bandwidth SF0434BA03230S typical performance center = 433.92 mhz, 1 mhz/div (12.5 khz incr) 8/2012 ? 5 x 5 mm ceramic lcc package, 8 pads ? rohs compliant
parameter min typ max units center frequency, (fc) 1 433.89 433.92 433.95 mhz minimum insertion loss - 3.9 6 db absolute delay - 3.15 - us 1 db bandwidth 2 0.12 0.2 - mhz lower 3 db frequency 2 - 433.79 433.83 mhz upper 3 db frequency 2 434.01 434.05 - mhz 3 db bandwidth 2 0.18 0.26 - mhz 50 db bandwidth 2 - 0.93 1 mhz relative attenuation (10 - 433.38 mhz) 2 50 55 - db relative attenuation (434.46 - 700 mhz) 2 50 55 - db turnover temperature - 0 - c temperature coeffcient of frequency (tc) 3 -0.032 ppm/c 2 source and load impedance 50 ohms ambient temperature (tref) - 25 - c specification notes: 1. reference frequency at 25 c. computed as mean of the 3 db frequencies. 2. all db values are referenced to the insertion loss value. 3. typical shift of frequency response with temperature is: f=(t-tref)*tc*fc notes: ? recommend 2% or better tolerance matching components. typical inductor q=40. ? optimum values may change depending on board layout. values shown are intended as a guide only. maximum ratings matching circuit parameter min max units storage temperature -40 85 c input power level - 10 dbm 8/2012
package outline marking suggested footprint units: mm tolerance are typically 0.15 mm except where indicated. pad confguration: input: 1 output: 5 ground: all other pads package material: body: al 2 o 3 ceramic lid: kovar, ni plated terminations: au plating 1 m min, over a 1.3 - 8.9 m ni plating 8/2012 +1 855.294.3800 www.apitech.com +1 888.553.7531 apitech.com/microwave 8/2012
|